Coil Issue?
#1
Coil Issue?
Hi all,
I have a 98 Wolverine 350. It has been having a weak spark and seems like it has been getting weaker. I ohmed the stator, coil and plug boot. Here are the results, with the values for whats its supposed to be right after.
Stator: W/G wire to W/R - actual: 486 ohms, Supposed to be: 459-561 ohms
Brown-Green wire - actual 388 Ohm, supposed to be 270-330 Ohms
Coil: Lead terminal to ground: 0.9Ohm, supposed to be .36-.48
Lead term to Spark Pl Boot- actual :10.35 K Ohm, supposed to be 5.44-7.39 K Ohm
Does the last one seem to be out too much(lead to Sp/Pl boot)?
This was all taken at 2 degrees Celcius, Book values at 20 degrees C
Thanks
I have a 98 Wolverine 350. It has been having a weak spark and seems like it has been getting weaker. I ohmed the stator, coil and plug boot. Here are the results, with the values for whats its supposed to be right after.
Stator: W/G wire to W/R - actual: 486 ohms, Supposed to be: 459-561 ohms
Brown-Green wire - actual 388 Ohm, supposed to be 270-330 Ohms
Coil: Lead terminal to ground: 0.9Ohm, supposed to be .36-.48
Lead term to Spark Pl Boot- actual :10.35 K Ohm, supposed to be 5.44-7.39 K Ohm
Does the last one seem to be out too much(lead to Sp/Pl boot)?
This was all taken at 2 degrees Celcius, Book values at 20 degrees C
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)