warrior chain drive sucks!!
#1
hi, i have a 99 warrior with a DG pipe and a 145jet in it. I recently put a 14 tooth sprocket on the front, i runs great but the chain started slipping on me. ever scince i got the warrior it has been a great machine but the drive chain has given me all kinds of problems. i wont stay tight no matter what i do. does anyone have any advice for me, Thanks
#2
I'm not sure how a chain "slips" unless the sprocket(s) are very worn. There is nothing wrong with the set-up on the warrior with the exception of the difficult adjustment procedure. Once it is adjusted properly nothing should slip or change. Are the 2 long bolts throught the carrier tight as well as the 2 adjusting bolts on the rear of the carrier??? Can't be anything else that I can think of. Are you adjusting according to the manual which I think is about 1 to 1.5 " of slack as measured in the middle between front and back sprockets? Are you measuring with the suspension comrpressed?
#3
#4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)