I TRY TO INSTAL MY 12T SPOCKET ON MY RAPTOR BUT HAVING PROBLEM LOOSING THAT BIG HOLDING NUT.TO LOOSE THAT NUT DO I HAVE TO TURN CLOCKWISE OR ANTICLOCKWISE.ANY TRICK WOULD BE GLADY WELCOME.THANKS!!!!!"""""""""""""""""""""YAMAN

 

YAMAN...did you get the 12 tooth sprocket here in Quebec or did you order from the States? I am planning on ordering a couple sprockets real soon.

Thanks

 

Counterclockwise, just like a regular nut. You will need a 32mm socket. I think that is equal to a 1 1/4" SAE. Loosen the chain adjustments on the swing axle to get some slack and then readjust it when you have the 12 on.

 

Exactly as above but if you remove the left footpeg you'll have a far easier time. It's only 4 bolts total and easy. Keep the foot brake on and use a long breaker bar and the nut will come loose easily. I assume you bent the locking tabs flat.

 

THANKS ,I JUST NEED TO FIND A 32 MM SOCKET AND THAT SHOULD BE NO PROBLEM.
I ORDER MY SPROCKET FROM THE SPROCKETSPECIALIST.COM DIRECT ON THE NET .THEY HAVE STOCK AND SHIP IT BY MAIL ,IT TAKE ABOUT 2WEEKS TO GET IT COST 32.00 CDN + 11.50 DUTY.