What would be the best carb for a heavily modded blaster? It is still 200. I was thinking something like a 30mm flat slide. You can check out my website if you need to know more about this.

 

stock is 28mm right? i would think you can go bigger then the 30mm. i dont know much about blasters so dont take me on the word.

 

also where are you looking for power? if your looking for all around, i would stay on the smaller side but if you want big gains in the top go bigger. if it was me i would probably try a 32mm pwk. but as i said i dont know anything really about modding blasters. get advice from someone who has done this to theirs. later.

 

stock size is a 26mm. but if you lok at my site you'll notice that soon, It'll be a 200cc liquid cooled, powervalved blaster. I can get the most airflow since the powervalve will help make up the torque. My main concern is how to make it fit. I know i can fit a 28 in the stock intake boot, or I can get an intake manifold for a 34-35, but the 34-35 seems just a little overkill.

 

I Have a Heavly modded Blaster with a 240 kit. Right now I am using a 38mm Mikuni Flatslide and it runs great. IF I were you I would look in the 30-33mm range. What ever size you pick get a Flatslide it makes all the differwnce in the world.