Yamaha Discussions about Yamaha ATVs.

Pro Design Intake Kit??

Thread Tools
 
Search this Thread
 
Old Aug 27, 2001 | 02:56 PM
  #1  
newraptor2000's Avatar
Thread Starter
|
Range Rover
Joined: Nov 2000
Posts: 104
Likes: 0
Default

Would the owners of these for a Raptor please let me know if you think they are worth the money, and how much performance do they give, if any. Thanks[img]i/expressions/face-icon-small-confused.gif[/img]
 
Reply
Old Aug 27, 2001 | 07:23 PM
  #2  
SykoQuadRider's Avatar
Pro Rider
Joined: Jan 2001
Posts: 510
Likes: 0
Default

I had got the system with K&N and a full HMF exhaust and the thing flies. Tottaly differant bike. Pulls hard through all gears and destroys stock Raptors with this setup.
 
Reply
Old Aug 28, 2001 | 06:45 AM
  #3  
Jeffrey1159's Avatar
Trailblazer
Joined: Aug 2001
Posts: 35
Likes: 0
Default

I have a pro design intake in the foam. no increase in hp. way better than stock. It came with the billet plate filter outer filter and a outer ware.
 
Reply
Old Aug 28, 2001 | 12:05 PM
  #4  
kuz28's Avatar
Pro Rider
Joined: Apr 2001
Posts: 1,191
Likes: 0
Default

NEWRAP2000
I would not expect any significant power gain unless you plain on cutting up your airbox. Even then, you will need new pipes and jetting to captalize on the gains. Like Otterbob, my stock are filter fell apart. i think it had to do with the aircleaner i was using in conjunction with the cheap adhesive Yamaha chose to use on the life lungs of my beloved sweeeeet blue Raptor. Those bastards.

Well, She's with me now! and i 'm gonna take good care of her.And you should to. They don't know her like i do. They saw fit to bolting on cheap axles, wrong gearing...the list go's on and on. BUT,SHE'S SITTING PRETTY NOW AND...

OH Yeah, Pro design. definately worth the $$. Perfect starting point when it comes to mods.



 
Reply
Old Aug 28, 2001 | 03:24 PM
  #5  
newraptor2000's Avatar
Thread Starter
|
Range Rover
Joined: Nov 2000
Posts: 104
Likes: 0
Default

Thanks to those of you that have replied. I have already purchased my Kit for $96.17 (to include S&H) from Rocky Mountain ATV. I haven't put it on because my ride is at the dealership getting repaired (awaiting parts). I was just wondering if I can expect any performance gains. Thanks all[img]i/expressions/face-icon-small-smile.gif[/img]
 
Reply
Old Aug 28, 2001 | 09:12 PM
  #6  
otterbob's Avatar
Pro Rider
Joined: Mar 2001
Posts: 246
Likes: 0
Default

don't expect any power gains at all unless you run without the lid that is
 
Reply
Old Sep 1, 2001 | 12:35 AM
  #7  
chasman's Avatar
Pro Rider
Joined: Oct 2000
Posts: 588
Likes: 0
Default

I didn't notice any power gains either, but it is worth the money for the simple fact you know the air filter is on. No more guessing with the stock filter set up.
 
Reply

Trending Topics

Old Sep 1, 2001 | 11:37 PM
  #8  
VMAX12's Avatar
Pro Rider
Joined: Oct 2000
Posts: 300
Likes: 0
Default

I JUST PUT ON MY PRO DESIGN INTAKE WITH THE KN FILTER. I HAD NO GAINS UNTIL
I REJETTED, THE KN LEANED OUT MY CARBS SO BAD THAT IT WAS SIEZING UP THE SLIDES
IN THE CARB I USED 145-150 MAIN JETS AND ITS A NEW BIKE!!!

01 BLU 660R
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
Oct 22, 2015 07:04 PM
Sassinm1
General Chat
1
Sep 30, 2015 04:23 AM
ATVC Correspondent
Drivetrain, Suspension & Tires
2
Sep 30, 2015 01:37 AM
Todd C Wadas
2) Chassis problems..
0
Sep 23, 2015 11:31 PM
ATVC Correspondent
Riding Gear
0
Sep 15, 2015 02:59 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:35 AM.