Yamaha Discussions about Yamaha ATVs.

My Blaster is screwed please help!!!!!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 10-28-2001, 08:32 PM
iridewarrior's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2001
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey i was down at the track today and i was running laps all day and it was running great i took a break then went back out and it took off and ran great then i went into the first turn and hit the throttle and the enginge started to cut out.....so i rode off the side and tried hitting the gas again it goes froma good idle to like its not ruinnin when u rev it then dies then u can start and the same thing will happen it starts up wit no prob but as soon as i push the gas it will doe please help
 
  #2  
Old 10-28-2001, 08:42 PM
Nike5131's Avatar
Trailblazer
Join Date: Sep 2001
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

u might have mixed the gas wrong like too much oil
 
  #3  
Old 10-28-2001, 08:55 PM
iridewarrior's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2001
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

it is oil injection i dnt need to premix
 
  #4  
Old 10-28-2001, 09:10 PM
250rampage2's Avatar
Range Rover
Join Date: Aug 2001
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds, like it could be a blocked passage in the carb, but I'm puttin' my money on the T.O.R.S. System. There is a connector under the hood peice that you can unplug to dissable it...I'm sure someone on here can tell you which one to unplug.
 
  #5  
Old 10-28-2001, 09:22 PM
250rampage2's Avatar
Range Rover
Join Date: Aug 2001
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok, just do this:
Take your front hood off, follow the wires from the throttle to a little box, there are 2, make sure you have the right one. Un-plug it and this will make the system activate and you will not be able to touch the throttle without it bogging. (try it out, that should tell you if it is the problem) To totally disconnect it you have to unplug the box AND the wires coming from the carb. Now start it up and see if that was the problem.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jackg17
Ask the Editor
7
07-16-2018 04:01 AM
Beeline08
Yamaha
3
11-11-2016 04:00 PM
ATVC Correspondent
Performance Mods and Project Quads
5
10-10-2015 10:20 AM
Ahtatu
General Chat
9
09-28-2015 12:14 PM
Jackg17
General Chat
0
09-26-2015 09:30 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: My Blaster is screwed please help!!!!!!!



All times are GMT -5. The time now is 10:05 AM.