Any Kodiak owners.....
I want to replace my tires with something larger, but use the stock wheels and no lift kit or spacers.

What size tires are any of you using?

Thanks
2tall
'01 Kodiak

 

I just put BearClaws on my 01 Kodiak. I stayed with the stock size up front so as to not lose any handleing. I went with 1(one) extra inch on the rear.

WHAT A HUGE DIFFERANCE! It is like riding a new quad.

The BearClaw was a nice choice because its a 6ply with a very nice tread. Its a slightly rougher ride but MUCH more stable.


Andy

 

I looked at Bear Claws tonight, but the dealer didn't have my size. They are 4 ply, the ones available here in Canada anyways. I also looked at 4 ply Blackwaters. Price wise the Bear Claws are better, I think I would go with them.

I'm not sure if I should be looking at a 6 ply with the type of riding I do. There are some Maxxis availabe, but not sure if they come in an approprate size.

Going with a different size on the front...you'll have to be careful not to do any riding on hard surfaces in 4wd. You'll mess up your driveline for sure. I won't go that route. I'll make sure I have the same height front and back.

I did something else I hadn't planned on though, I ended up buying a 1" lift kit. This should allow me some more flexibility for sizes. I just hope it doesn't ruin the front CV joints. I may end up with spacers too.

 

I'm not sure that Kenda would make two differant tires... anythings possible tho.

I am misstaken, I went an inch wider not taller... need to change my sig.

Goodluck, no matter what you decide.


Andy