i just got my banshee and i already have problems with it
I was out in the dirt spinnin circle and such. then i pulled out of the spin and downshifted to take off again and then my clutch cable wouldn't pop back out. then i look down and my clutch cable fell off on the case. so i thought no biggie i'll just put it back on. but the clutch lever on the case only moves about 1/2 inch. and the cable doesn't work to well anymore. then i try to move the clutch lever on the case with my hand while in gear to see if it will roll. but the tires are still locked. i can still shift through all of the gear when the engine is off. and now i can't get the motor to start. is my clutch already blown? or is it something else you think.
i tried to describe it the best i could but ask questions if you need more info.
thanks for the help

 

only advice i have is to take the right side case off. drain the oil and check out that everything is in place inside the basket and check out the clutch linkage thing and see if the baLL welded to the long shaft.

 

I would say the same thing just pop the cover off and check out the clutch and linkage sounds like something in the case has poped apart. keep us posted it would be good to know what happened.