I just bought a yosh comp full system and ordered the gytr jet kit for my raptor.

They say the kit is for aftermarket exhaust and modified air boxes. The kit comes with pilots, mains and needles.

Does anybody have any experience withthis kit?

Is it better or worst than the dyno-jet kit?

TIA!

 

hmmmmm...so nobody has used this kit yet?

I guess I'll be the guinea pig. I'll post my experience/results if anybody is interested.

 

where did you get the gyt-r jet kit from. i've seen pictures of it but i havent found any place that sells them.

 

What size pilots? New needles? Why don't they just put these things in when they make their quads? Oh, my bad. Then they can't get a piece of the aftermarket pie.

 

http://www.off-road.com/atv/projects...ce/intake.html
this is where i seen them.

 

I got the kit from my local dealership for $60.

The one package to the left in Raptor58's pic looks like what I got.

I'm just going out on a limb here when I bought the kit because they don't say what size the jets are just that it's for air box mods and aftermarket exhaust.

I should be coming in sometime next week. I'll post back and let everyone know how it turns out.

wshrdskin, I don't see why they would include it with the stock quad.

 

I picked up the GYTR jet kit at my dealer last night. I'm new to jetting but I have to say it's a pretty good package. 5 main jets (I have to believe they're Mikuni but ?): 145, 150, 155, 160, 165; 2 25 pilot jets, 2 needles with a greater taper than the stockers and 4 E clips. It also came with some half way decent instuctions and recommendations (stock w/ lid, stock w/o lid, gytr pipe w/ lid, gytr pipe w/o lid).

I'm going to start with 160 & 165 mains with the 25 pilots for no lid, K&N with precharger and full yoshi compitition pipe. Any suggestions?

I can't wait to try out my new and improved raptor!

 

2fiftyX I just bought the same set up. How did your jetting turn out?And what did you do with your lid?

 

we got those at my dealer. the jets werent large enough. wonder how the needles and other parts are tho.

I needed a 170 for me too...I just madea jet kit for my LRD

 

The kit worked out great! There's power everywhere in the powerband and it hits hard. I just followed their instructions for a no lid air box and aftermarket pipe and I jetted it right on the first time.

Mukuni Jets are sized differently than Dial-A-Jet. I believe somebody posted a chart comparing the two. If I remember right, the Mukuni 165 jet was equal to DJ's 180+-. Do a search and you could find it.