Installing Graphics??
#16
tonihjt is the night. I looked at 5 different places for that sticker stuff. To heck with it. Later on when all are asleep i will roll the quad in the living room and do it. That will make my wife happy.
#17
Just a few drops of dish soap and water in a spray bottle will work for putting them on. Windex will work but will break down the glue. Spray the back side of the decal and the plastic put the decal in place and squeegy it out from the middle out using the heat gun around the curvy parts. Using the heat gun really works good for getting the old ones off. Use a little alcohol to remove any excess glue but there probably won't be any if you use the heat gun to take them off.
#18
Mark, do not use too much windex. Do yourself a favor and make sure only the real flat areas are wet. If you have water in the curved areas it wont stick right away and will lift. You'll be messing with it all night!
#19
Not to confuse you more but i have installed a few graphic kits and i always put a squirter off a Windex Bottle and put that on a Rubbing Alcohol Bottle.Rubbing Alcohol dries sooner.Its worked great for me. late,zubbeyboy


