hey i was wondering if i could get your kit mascman please email me at tmacisN1@aol.com with info

 

hey mascman can i get a cooling kit my email address is TmacisN1@aol.com email with info about it

 

yfzblue450,
an easy way to increase the cooling capacity of the Wolverine is to find a Big Bear or Kodiak oil cooler, the Wovlerine has only a 3 pass cooler, the others have a 5 or 8 pass one, and the fittings on the oil lines bolt right up !! The only thing you will need to do is fab the mounting brackets, I picked one up on ebay for 35 bucks, just haven't had time to put it in.

 

95Wolv,
thanks for your help

Danny

 

will the kodiak or bigbear oil cooler fit on the wolvy?

 

The BB or Kodiak will fit, the width is exactly the same, just taller because of more oil passages, you will need to take some metal strips and make brackets to bolt into the stock holes, or remount it back a little to clear the front better, just make sure the oil lines reach, and it will work fine. Make sure to add a little more oil, it will take more to fill the cooler, don't want to run the sump low !!

 

thanks 95

 

Look at my homepage to see the 95' Big Bear setup. I got the cooler from Alamo Motorsports.