banshee problem
#12
use maxima castor 927 and mix it 4 oz. to a gl. the jetting from the factory is the same as it is up north as it is down here in texas so therefore they won't always be right. install the toomeys and pm me i have a pro design air box adaptor with pro design filter airbox and all pm me for price. CHEAP.
#13
You have nothing to worry about.... Your banshee is pretty new so running rich is a good thing for the break-in. Remember also, when it's that cold you have to choke it for a while which makes it even more rich so you're bound to get oil out your pipes. Nobody ever hurt their from being rich - now lean is another story.
Put those Toomeys on, jet it up to AT LEAST 280 mains (depending on other mods) and take it from there. With my mods I run 320 mains at sea level.
Put those Toomeys on, jet it up to AT LEAST 280 mains (depending on other mods) and take it from there. With my mods I run 320 mains at sea level.
#16
konobakayaro, you don't know what you are talking about. The ONLY yamaha with a sphyncter valve is the blaster! The banshee uses a modified Pow-gro valve that only needs cleaning every 5th ride! If you "scrape" this valve, you will scratch the Milon coating and it won't operate efficiently! Also be careful with harsh solvents.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Jul 7, 2015 11:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




