Anyone using GYT-R adapter plate?

Reply Subscribe

Thread Tools

Search this Thread

Mar 9, 2003 | 12:10 PM

RaptorRy

Thread Starter

Pro Rider

Joined: Jan 2002

Posts: 354

Likes: 0

Anyone using GYT-R adapter plate?

Anyone using this is there any +/- with this or should I go with a different one? thanks Ry
P.S. I tried the standard K&N with out adapter and it fir so bad I broke the airbox Thanks Turbo for the new one

Mar 9, 2003 | 12:44 PM

sixsixT

Extreme Pro Rider

Joined: May 2002

Posts: 3,286

Likes: 1

Anyone using GYT-R adapter plate?

Pluses: uses 6 screws all the way around, cheaper
minus: the flange that the filter clamps to is a little shorter than the pro flow

Mar 9, 2003 | 02:52 PM

Starky

Pro Rider

Joined: Dec 2002

Posts: 1,940

Likes: 0

Anyone using GYT-R adapter plate?

I'm using 14mins adaptor plate. I don't know if he makes them or what, but I haven't had any trouble with it at all.

Mar 9, 2003 | 04:02 PM

RaptorRy

Thread Starter

Pro Rider

Joined: Jan 2002

Posts: 354

Likes: 0

Anyone using GYT-R adapter plate?

Ok how bout K&N or FOAM mostly ride in dusty or wet conditions form one extreme to the other.
Plan on doing a couple dune trips and I will be running prefilter lid

Mar 10, 2003 | 10:08 PM

Turbo33

Pro Rider

Joined: May 2002

Posts: 626

Likes: 0

Anyone using GYT-R adapter plate?

I use all K&N because they aren't as messy to clean and they last forever.
Not to mention they are a good sponsor for me.[img]i/expressions/face-icon-small-cool.gif[/img]

Mar 10, 2003 | 10:44 PM

UBETRUN

Pro Rider

Joined: Jan 2003

Posts: 1,862

Likes: 0

Anyone using GYT-R adapter plate?

I'm using 14mins adapter also. It has 6 screws and flanges that are long enough to hold the clamp. They are for sale at Craycraft for $45

http://www.14mins.com/craycraftyamaha_raptor.htm

Mar 10, 2003 | 11:48 PM

THEMOOSE

Pro Rider

Joined: Jan 2002

Posts: 2,272

Likes: 0

Anyone using GYT-R adapter plate?

I used a GYT-R adaptor with a K&N, the flange was too short & I ended up cutting the boot on the filter.
I tossed it in a box & got the Pro design adaptor & K&N.

Anyone using GYT-R adapter plate?

Anyone using GYT-R adapter plate?

Trending Topics