Make Blaster FASTER???
#12
Originally posted by: pimpy
boost bottle,fmf pipe and silencer or pro circuit pipe and silencer, dyno jet, k&n air filters, bigger front sprocket or smaller back sprocket just do one of the sprocket changes if u do both youll lose alot of power but also gain alot of top end
boost bottle,fmf pipe and silencer or pro circuit pipe and silencer, dyno jet, k&n air filters, bigger front sprocket or smaller back sprocket just do one of the sprocket changes if u do both youll lose alot of power but also gain alot of top end
#15
I've had both the crappy vito's and I presently have the hollywood 240 and the vito's sucked goat ***** compared to the hollywood kit, I wouldn't even put that vito's sh*t in the same catagory, freakin junk
#16
Im waiting for my Hollywood kit as we speak. I am getting a 240 that is ported and polished out the ying yang...From what I have heard they are upwards of 40 HP...
Ebomb..I think your freakin retarded. The vito's dosn't have anything on the HWD. I drove a vitos just last week and wasn't impressed at all. Sure it was a improvment from stock duh, but it wasn't anything super special at all.
Ebomb..I think your freakin retarded. The vito's dosn't have anything on the HWD. I drove a vitos just last week and wasn't impressed at all. Sure it was a improvment from stock duh, but it wasn't anything super special at all.
#17
this is what i did to my blaster and now it screams and it will beat z400 and 400ex's
2003 Yamaha Blaster
-Oil Injection blockoff $30
-Toomey b-1 kit $320
-shave the head 20 thousands so you can still use 91 octane $20
hey just try it and hope it works out good
thanx
2003 Yamaha Blaster
-Oil Injection blockoff $30
-Toomey b-1 kit $320
-shave the head 20 thousands so you can still use 91 octane $20
hey just try it and hope it works out good
thanx
#18
Shavo.. I like the vito's kit.. both my friends have a vito's and a HWD.. IMO is I dont care what you think about vito's Its a good company.. I never ragged on anyo of them.. Sorry to get all you hardcore sick blaster rider's angry...
#19
Originally posted by: AnimalMother85
not to shoot you down, but a boost bottle for a blaster? so it can balance out its single cylinder? a blaster boost bottle is for people think they know that they work for banshees, so they must work for its little brother.
Originally posted by: pimpy
boost bottle,fmf pipe and silencer or pro circuit pipe and silencer, dyno jet, k&n air filters, bigger front sprocket or smaller back sprocket just do one of the sprocket changes if u do both youll lose alot of power but also gain alot of top end
boost bottle,fmf pipe and silencer or pro circuit pipe and silencer, dyno jet, k&n air filters, bigger front sprocket or smaller back sprocket just do one of the sprocket changes if u do both youll lose alot of power but also gain alot of top end
#20
There is alot a person can do to make their blaster faster. But beware of buying stuff just because the dealer says so. For good info on what works and doesn't work on a blaster, check the links in my sig. These guys build and sponser blaster racers, it doesn't hurt that they are affordable as well.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
Apr 9, 2020 11:19 AM
drewy2dope
Ask the Editor
11
Jul 31, 2015 09:36 AM
joeyupton
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Jul 14, 2015 11:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




