Yamaha Discussions about Yamaha ATVs.

banshee problem

Thread Tools
 
Search this Thread
 
  #11  
Old 04-13-2003 | 05:12 PM
pureinsanity's Avatar
Weekend Warrior
Joined: Apr 2003
Posts: 18
Likes: 0
Default banshee problem

Something else you could check is your need on your slide i had one of the e clips break and the needle fell to the bottom it would idle fine but wouldn't rev
 
  #12  
Old 04-13-2003 | 05:17 PM
Guest
Guest
Posts: n/a
Default banshee problem

Dunepilot>>>> LOL "swinger springs" ! tell me about it....... PM me your E-mail addy....
or just say it out loud...

liquidsand
 
  #13  
Old 04-13-2003 | 10:47 PM
DunePilot858's Avatar
Pro Rider
Joined: Feb 2000
Posts: 394
Likes: 0
Default banshee problem

It should be under my profile but if not... sanddiegoduner@yahoo.com
 
  #14  
Old 04-15-2003 | 04:45 PM
BitchenBanshee's Avatar
Weekend Warrior
Joined: Apr 2003
Posts: 15
Likes: 0
Default banshee problem

check your jets in your carbs, you could be getting to much fuel to one side, i had the EXACT same problems, pulled hte carbs several times, new plugs, everythong, i tended up being that the littl washer that ogers under my main jet in one carb was missing, and letting to much gas in and fowling my plug right away as i would rev it up, it would idle fine, then run bad, that fixed it, i have also heard of other people haveintg this same problem, might check that out.
 
  #15  
Old 04-18-2003 | 03:12 AM
DunePilot858's Avatar
Pro Rider
Joined: Feb 2000
Posts: 394
Likes: 0
Default banshee problem

Well it turned out being a serious but minor problem. All I can say is it runs good now.
 
  #16  
Old 04-18-2003 | 10:59 AM
bansheeridr's Avatar
Trailblazer
Joined: Apr 2003
Posts: 33
Likes: 0
Default banshee problem

So, what was the problem my guess would be to check the parkingbreak, then the plugs, and then on the banshee is has a Throttle override system that sits on top of the carbs. When you take off your seat you can see them. Wiggle them and see if they are loose if they are thats your problem.
 
  #17  
Old 04-18-2003 | 01:47 PM
DunePilot858's Avatar
Pro Rider
Joined: Feb 2000
Posts: 394
Likes: 0
Default banshee problem

Parking brake is removed, TORS units removed and replaced with carb caps and idle kit. It does idle a little high but its not so high I would be concerned.
 
  #18  
Old 04-18-2003 | 01:57 PM
Guest
Guest
Posts: n/a
Default banshee problem

Its all fixed now thanks to dunepilot.. the guru...[img]i/expressions/face-icon-small-cool.gif[/img]
Yeah it was a minor but VERY serious problem.... Lets leave it at that...lol


liquidsand
 
  #19  
Old 04-18-2003 | 02:13 PM
Batoutahell's Avatar
Pro Rider
Joined: Sep 2001
Posts: 2,023
Likes: 0
Default banshee problem

Oh, come on let us know what the problem was. You might help someone else out.

bat
 
  #20  
Old 07-27-2003 | 05:45 PM
minimansion's Avatar
Weekend Warrior
Joined: Jul 2003
Posts: 7
Likes: 0
Default banshee problem

Originally posted by: LiquIdsaNd
Its all fixed now thanks to dunepilot.. the guru...[img]i/expressions/face-icon-small-cool.gif[/img]
Yeah it was a minor but VERY serious problem.... Lets leave it at that...lol


liquidsand
can you let me know how you fixed it? I have the same exact problem right now....

-minimansion

eddief@minimansion.com
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cole Hadden
Polaris
22
08-24-2020 11:11 PM
Dirtbikemike1
General Chat
1
07-11-2015 03:36 PM
cSchwartz
Honda
1
07-09-2015 02:40 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-07-2015 11:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: banshee problem



All times are GMT -5. The time now is 06:20 PM.