Dynojet kit

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2003 | 04:26 PM

#11

wshrdskin

Extreme Pro Rider

Joined: Feb 2002

Posts: 4,156

Likes: 0

Dynojet kit

Do what the instructions say.

Here is the online instructions incase yours are hard to read.

Dynojet Kit

Quote:

Install the Dynojet needles on groove #4 from the top, using all stock spacers. Install the Dynojet slide springs (DSP026) in place of the stock slide springs . NOTE: The DSP77 springs do not have to be used, they are supplied in case the stock springs are misplaced.

Quote:

If you are running an aftermarket slip-on exhaust with a high flow baffle, use the
DJ144 in the left carb and the DJ146 in the right carb below 3000 feet

Your removing the baffle so go with the after market slip on instructions. If you have a K&N pro design or a pro design foam filter and run with no lid you might want to use the 146/148 jets, it may not be nessessary though.