Backfiring through the carb?!
#1
Backfiring through the carb?!
Hello all, its been almost 8-9 years I think since I have posted on here, just bought a trike again!
1984 yamaha ytm200 - chain driven
I have rebuilt the carb and I am not sure where to go with the carb settings. I have a service manual but it only shows one carb model and I believe there are two.
Mine had the pilot screw on the bottom, not on the "side" of the carb. I was wondering if this is related to the backfiring, I have checked the timing and valve clearance and they are both good. Exhaust is not plugged.
Any help is more than welcomed!
1984 yamaha ytm200 - chain driven
I have rebuilt the carb and I am not sure where to go with the carb settings. I have a service manual but it only shows one carb model and I believe there are two.
Mine had the pilot screw on the bottom, not on the "side" of the carb. I was wondering if this is related to the backfiring, I have checked the timing and valve clearance and they are both good. Exhaust is not plugged.
Any help is more than welcomed!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)