Hi guys i rewired my sons loncin 90cc quad yesterday as the last cables fried. but i am not getting a voltage to the coil on the spark plug.

here are the pictures.

CDI UNIT :


SOLONOID :



SOLONOID CONNECTION



CONNECTIONS TO THE MAGNET




BY PASSING THE KEY BARREL



THE COIL AND SPARK PLUG



CONNECTIONS TO KILL SWITCH AND START BUTTON



after realising there was no spark i searched the internet and found that it said to test the cdi and pop out the middle wire (black and white) and disconnect the kill switch and it started. but for some reason now after connecting all the wires properly its stopped starting theres no voltage once again on the kill switch i have 2 earths running to it and on the start button i have two lives. but i have a black and white cable from the cdi still hanging there i have tried putting it in the cdi and out and it doesnt make any difference. as its started twice i know theres nothing wrong with the cdi or the starter motor.

any help would really be appreciated.

 

when the earth circuit is connected to the coil does that stop the spark?

 

i would say......yes. although i don't know all about the CDIs, you gotta kill it somehow.

 

tried every cable avalible and kill switch connected still stops engine running