Help identifying this ATV
#1
Hello ATV'ers
Always wanted one, but either couldn't afford one or justify buying one.
But today, I picked one up for the price of a set of tires and wheels.
It has some wiring issues and broken plastic, but I believe it can run again.
But first, I need your help identifying what brand and model it is.
Here's a pic at photobucket
http://i1119.photobucket.com/albums/...ps0a471c85.jpg
There's a number on the motor, it's 7AVTXO.11NFG
Did a google search, but didn't find anything.
I'll check back each evening to see if anyone replies with any pertinent info
Thanks
Always wanted one, but either couldn't afford one or justify buying one.
But today, I picked one up for the price of a set of tires and wheels.
It has some wiring issues and broken plastic, but I believe it can run again.
But first, I need your help identifying what brand and model it is.
Here's a pic at photobucket
http://i1119.photobucket.com/albums/...ps0a471c85.jpg
There's a number on the motor, it's 7AVTXO.11NFG
Did a google search, but didn't find anything.
I'll check back each evening to see if anyone replies with any pertinent info
Thanks
#3
Welcome to the forum mrkool!
Its Chinese. could be any of dozens of "brands"... more than likely a 110cc engine.. but could be a 90cc or 125cc also. Id look for a number on the frame.. in front behind the bumper. More info in a VIN than a engine number.
Its Chinese. could be any of dozens of "brands"... more than likely a 110cc engine.. but could be a 90cc or 125cc also. Id look for a number on the frame.. in front behind the bumper. More info in a VIN than a engine number.
#4
Yep is is some Chinese "brand" I would not have bought it but that is in the past. If your having troubles getting it running I have some videos explaining just that (check my website) Motorcycle How to and Repair - Home I also have some wiring diagrams on my site for "typical" Chinese/pitbike engines under my repair manual section. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)








