hello, new to this site. my daughter has a 2001 kasea skyhawk 150 had to replace isolator between carb and cylinder (bought online at a&j parts).removed carb to also clean out carb bowl,gasket looks ok so put back together (rubber gasket). well carb gasket leaks,took apart again, got gasket material and made my own. ran for alittle,now gasket leaking again.looked online to find parts again, a&j doesn't sell the gasket,just wondering if anyone has an insight on where i could get this rubber gasket. any help would be greatly appreciated
thanks dave

 

The chinese motors are pretty much all the same the difference comes in the style of motor so any motor with the style you have should fit. I believe you should have a small fan kind of attached to the cyl any tao tao or Roketa 150 is the same or should be.
Eagle Atv Parts

 

hey. thanks for the reply,looked at there site found carb pic that looks like mine,but still no seal listed in that section well this is a start and i did e-mail them. thanks for the info
dave

 

Kasea isn't Chinese . They are Tiawanese.
Maybe that fact will help you find parts.
I'd like to know more.
Is it sucking air or leaking fuel out?

 

What works well is red RTV automotive silicone. Put some in the track for the o ring put the o ring back in and then put some on the mating surface. Bolt everything back together and let it cure for 12-24 hours. did mine this way and never had a issue. This method is used all the time for sealing rc carbs.

 

+1 just make sure you let it cure and it's clean and dry when you apply it.

 

well, fixed it and know one will ever guess what i used!!!! it was leaking fuel,also i have a fuel filter in the line and the motor would not pull fuel through, so took it out, can blow air through, but no fuel. starts, runs fine now.














P.S. i used a piece of rubber pond lining and cut to size.........