Zebra 110cc. when starts it runs wide open

 

2 things to check:

1. throttle cable, is it tight and the slide is wide open calling for more throttle?
2. slide in carb is installed backwards (180°) off and the grooves are not lined up with the ****(alignment pins) inside the slide passageway. therefore, the slide cannot go all the way down into the carb and is in the open position.

 

I though it was something like that. thanks alot. happy newyear

 

you know what i'm talking about, right? there's 2 ways to put the slide in the slots, the correct way and the incorrect way. just look at the grooves in the slide and the placements of the alignment pins/**** inside of the slide's passageway. the slide should go down all the way inside of the carb without much resistance.