Hey all, i have a 2007 107cc Chinese quad and I'm getting no spark. Im pretty sure everything is wired right but i have a bad part. I have a 5 pin cdi the blue and white one goes to engine and that one checked out, the red and black one goes to engine checked out, the ground checks out, and the yellow and black one on the positive terminal on coil checked out(kill swither isn't connector) the red and green wire on the regulator checks out, white one to the engine an yellow one check out. No spark. However i get 2.4 volts to coil when it is being cranked. But non out of coil. I think it's a bad cdi but i am not sure.