How do I by-pass the remote alarm on this quad.
Alarm wires are Red, Orange, Grey, Pink, Blue + 2 x yellow.
" wires to siren + antenna wire.
Will start only on remote with or without ignition key turned or even in !!
Checked kill switch and starter button for continuity and both seem okay but completely dead.
Regards,
Tim.

 

Got a 90cc quad that has what looks like a factory fitted remote alarm.
Need help to bypass it.

 

Are you sure its not a remote kill switch? Have you just tryed to unplug it?

 

merged your posts no need to have 2 on the same subject

 

Sorry for the 2 posts. Tried to edit the first one but couldn't, so did another.
I've unplugged the alarm box, then there is no spark. The wires coming out of the alarm that plugs into a loom plug are as follows. First colour are from alarm,next colour is loom wire colour.
Red - Red , Orange - Black , Grey - Black/white , Pink - Blue/red , Blue - Red/yellow , 2 Yellows , no connection. Black - Green.
Don't know if this helps you ? I could really do with some help with it.
I could try to send some pics, but not sure of how to send them to you ?
Regards,
Tim.

 

Connect the grey and pink wires ...had to do this on a Chinese quad not too long ago, as soon as you disconnect the alarm harness the kill switch is not operating, you need to jumper theses wires so it works.
Look at the diagram in this thread...
https://atvconnection.com/forums/1-e...gine-stop.html

 

Is brake light coming on when you press brake, may just be brake light switch not working.