blaster pistons in banshee

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2003 | 09:34 AM

justanotherRAPTOR

Thread Starter

Trailblazer

Joined: Nov 2002

Posts: 74

Likes: 0

blaster pistons in banshee

in order for to run blaster pistons all i have to do is have the cylinders bored and resleeved for the blaster pistons right?

Oct 10, 2003 | 10:02 AM

Hiram

Pro Rider

Joined: Oct 2002

Posts: 777

Likes: 0

blaster pistons in banshee

I believe so. They have also have kits that come with +4mm stroker cranks.

Oct 10, 2003 | 04:03 PM

Imback

Pro Rider

Joined: Dec 2001

Posts: 483

Likes: 0

blaster pistons in banshee

Quote:

Originally posted by: justanotherRAPTOR
in order for to run blaster pistons all i have to do is have the cylinders bored and resleeved for the blaster pistons right?

If you want to run Blaster pistons (wich is a waste of time and money) you need to get your sleeves bored to 0.080 no resleeving is involved.You will also need to run longer rods on your crank 115mm instead of the 110mm stock ones because the Blaster piston pin is located 5mm higher than the stock piston pin.You can run a long rod crank without wasting a nice set of sleeves by boring them to 0.080 Wiseco has been making pistons to match long rod cranks for a while now.