in order for to run blaster pistons all i have to do is have the cylinders bored and resleeved for the blaster pistons right?

 

I believe so. They have also have kits that come with +4mm stroker cranks.

 

If you want to run Blaster pistons (wich is a waste of time and money) you need to get your sleeves bored to 0.080 no resleeving is involved.You will also need to run longer rods on your crank 115mm instead of the 110mm stock ones because the Blaster piston pin is located 5mm higher than the stock piston pin.You can run a long rod crank without wasting a nice set of sleeves by boring them to 0.080 Wiseco has been making pistons to match long rod cranks for a while now.