Installed 109 cams. Is .006" valve lash OK?
Oct 28, 2003 | 09:48 PM
#3
Thread Starter
|
Trailblazer
Joined: Aug 2002
Posts: 36
Likes: 0
Installed 109 cams. Is .006" valve lash OK?
Thanks,
New topend in the motor, I fired it up for the 15 min @ 2K rpm as the cam paperwork asks. It seemed to get a little hotter than normal. Im wondering if the tolerances were tight.
New topend in the motor, I fired it up for the 15 min @ 2K rpm as the cam paperwork asks. It seemed to get a little hotter than normal. Im wondering if the tolerances were tight.
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)