Hi Guys this is my first post on the connection. I have been reading the posts here for over a year now. Talked to Rick Ritter and like most of you have said, he is a good guy. The 400 is all stock right now. Thanks everyone for all the posts on the 400 Scramblers. I decided to go with a trail mod setup from Rick. I hope to be just as happy as most of you are after getting this mod setup. Rick should receive my parts Monday so I hope in a week or two everything will be here to put back together. Here is a list of the parts and work that I will have done. Thanks again for all the great posts.

1. RCR Porting
2. RCR Head Work
3. Bore Stock Carb.
4. RCR Quick Rev Flywheel Modification
5. Wiseco Piston
6. Cylinder Boring ( if needed )
7. Wrist Pin bearing
8. Oil injection block off kit
9. Gaskets
10. Girdle
11. Jets
12. HPD Ceramic Trail Mod Pipe
13. HPD Aggressive Clutch Kit
14. Hi-flow Air Box Modification Kit

 

Welcome to the forum ---- and when you get it back together, HOLD ON!!

 

Welcome
You have made the right choice you will be very happy with the performance gains. Like Whitedog said hold on..

Jeff

 

Welcome to the forums[img]i/expressions/face-icon-small-smile.gif[/img]

Ride safe with all that new power..

 

Thanks for the welcomes. It is always harder to put back together then take apart so I'll probably have alot of questions.

 

Remember, your shirtsleves are going to need to be about 2 inches longer now.

 

Welcome to the forums,you will enjoy riding a lot more with the goodies.[img]i/expressions/face-icon-small-happy.gif[/img]