well today is the first day we all got to get out and have some fun. two of us wrecked pretty good, so now we are need a solution...mine first, i was doing some donuts while sitting on the handlebars and it caught, throwed the 4 wheeler sideways, and me to the ground. nothing major was screwed except, scratches and stress marks on the front right fender, kindly tore grip on the right side, and the mounting bracket for the reverse, so now its kind of loose. i went by the dealership today, and they are going to charge $10-$15 for a new mounting bracker, i was wondering i could get this on the internet, dont say ebay, have already checked...
next my buddy screwed his blaster up, he pulled a wheelie through a 20ft mud hole and it flipped pretty bad, sticking the throttle side(right) in the mud, stress marks...his throttle is now really hard to pull...we pulled the cable, tried to blow it out with a air hose, still hard, we even lubed the throttle part underneath the casing up by the grip, and then down by the carbs...we finally got it somewhat looser, so we decided to ride somemore, he has a custom made grab bar, and while doing a wheelie, one of the bolts broke, cause the end of the home made grab bar, directly into the oil tank [img]i/expressions/face-icon-small-sad.gif[/img]...other then these set backs today was great...so i got on ebay when i got home and ordered a new oil tank, grab bar, and throttle cable for his, and a new set of grips for mine...is there anyway to take stress marks out? i hate stress marks about as much as i hate stretch mark on women. im not going to bother replacing the plastic cause it will happen again. but what about the reverse bracket? just shell out the money from the dealer? thanks for any advice and KEEP QUADING!!!

 

hmm its just 10 bucks get it from the dealer...... by the time u order one u'll be paying the same amount or more w/ shp

 

To get the stress marks up heat the fenders with a heat gun