i am redoing my sprockets i got a 12 tooth from shop but the rears were $$. but i was looking on ebay and there were some any were from $10 to $15 . are thay cheep junk or is a sprocket a sprocket ? im not drag raceing or any thing. i would like to go down 1 in frunt and up 1 or 2 in rear but do not wont to waste the $ if i don't like it, and wont to change the rears.
its for a warrior FMF pipe , jetted, camed , and bored 1 over
thanx vincent

 

You get what you pay for i think you know what i mean by that [img]i/expressions/face-icon-small-wink.gif[/img]

 

i got a front sproket off ebay, steel, for 15$ New with shipping. It held up awsome, no complaints. [img]i/expressions/face-icon-small-smile.gif[/img]

 

i got my primary drive rear sprocket from rockymountain atv for 15 dollars no promblems, i picked the steel over the aluminum cheaper and will last longer also.

 

primary=front final drive=rear

 

no i got a primary brand rear sprocket they make chains to good stuff[img]i/expressions/face-icon-small-smile.gif[/img]

 

oh, never heard of that brand.