I just installed the WideRide wheel spacer offset kits. The tire on the left side now hits the fender, I have clearance on the right..not sure why that is..any suggestions?

 

Cut the fenders or get a-arms instead of spacers.

 

I could not find A-Arms for the LT80 so I went with the spacers..is there a fender that is more narrow?

 

Nope. We usually cut them.
ATV Racing in Phoenix Arizona makes a nice set of +3 a-arms.

 

do they have a web site?

 

Not that I know of.
Call information I guess. [img]i/expressions/face-icon-small-smile.gif[/img]

 

I had the same problem with my sons lt 80, I bent the bracket back about two inches, that cleared it. I wanted something better because he was starting to jump more, so I installed j&l entenders this weekend which moved the hub assembly out. He said that it handled better. The a-arms are the best but costly, here is a link to both j&l and atv racing

http://www.atvracing1.com/lt80parts.htm

http://www.jlatvproducts.com/catalog/index.htm

 

The fenders on the front don't provide much after the front is widened so cut it off. Besides it will look cool like the bigger kids quads[img]i/expressions/face-icon-small-cool.gif[/img]