After breaking a valve in July and shift forks on the first ride its finally together. Cruddy running problems I hope are solved, the needle wasn't tied down so it was bouncing all over, the choke wasn't shutting off the whole housing was moving not just the inner cable, so the weekend of the Genoa jamboree I ran with a loose needle and the chike on the whole weekend, no wonder it ran so bad. Doug took it for a spin tonight said it runs OK. starts pulling hard at 8000 levels off at 10000. I'll have to put it back on alky and see how it really runs. Time for another paint job too.

 

Very good news. Please keep us updated.

 

[img]i/expressions/face-icon-small-smile.gif[/img]

 

I know those little things can drive you crazy but hey sounds like your getting it lined out[img]i/expressions/face-icon-small-smile.gif[/img]

 

[img]i/expressions/face-icon-small-smile.gif[/img]

 

Its nice to hear it wasnt too serious! Good luck! I want to try to get one my Genoa ride in before the snow flies!!!

 

Me too[img]i/expressions/face-icon-small-smile.gif[/img] Hope to have Dougs together in the next few days. I'd like to go in the next couple of weeks, weather permiting.

 

Crazy: we will have to get together.....its no fun going alone, and not much fun going up with a goofy guy with a 4mm banshee! [img]i/expressions/face-icon-small-smile.gif[/img]

 

[img]i/expressions/face-icon-small-cool.gif[/img]

 

going to the 1/8 mile asphalt tonight, last time out ran 8.5 at 78mph that was alky with drag pipe. this time on gas with a full woods pipe.