say what would be the quad of your dreams mine would be this:

800 cc 2 stroke four cylinder w/ reverse and electric start with a kick back up. titanuim frame a-arms ect. carbon fiber plastics and gas tank. 10 inches of travel on the front shocks and 12 inches in back. xenon headlights. manual clutch. thats all i can think of.

 

A 88 trx250r with the following mods=Leagers pro trax frame,leager's A-arms,leager's swingarmwith cr500 linkage,pep ZPS shocks,leager's +2 axle,roll design spindles and hubs,roll design steering stem,AC pro peg nerfs,full bore plastic,ac grab bar,ac full skid plates,Ac stadium series front bumper,fastline braided steel brake lines,LRD 330 kit,LRD whale pipe,LRD silencer,18/11/8 holeshot mx's on champion beadlocks,19/7/10 holeshot mx's on champion beadlocks,22/11/8 8 paddle haulers on hiper tech carbon fiber wheels,22/7/10 dune tracker's on hiper carbon fiber wheels,Renthal trx bend handlebars,Magura hydralic clutch kit,MSD igntion,hinson clutch basket,barnett clutch plates and springs,brakign rotor's and pads all the way around,clarke gas tank,a life time supply of 110 octane race gas a bel ray 2 stroke oil.


I tried to keep it to stuff that is already available.

But for now the one I have is more than good enough!


moded out 86 trx250r
97 300ex
90 blaster

www.geocities.com/atvracerman1/picpage1.html

 

Mine would have to be also 800cc {or more}selectable 4wd,33 inch outlaws, about 2 foot of ground clearance,......Basiclly everything that mine is not lol

 

My dream quad would be if Bombardier comes out with 250 2-stroke or the twin cylinder 2-stroke.

 

mine would have to be a Twin 300r 2-stroke , kick starter , comes with lrd pipes and realitor tires liquid cooled and fanned coolled red plastic and just a fast bike

 

My dream quad:

TT - 87 250X with XR600 enigne, TC engine work, Works shocks, Lonestar frame/a-arms/swingarm/axle/swaybar/steering stem/hubs, McCreary tires(18x10 rear, 18x8 front), Hi-Per wheels w/beadlocks front and rear, Oneal Pro locks, Graydon nerfs/bumper/grab bar...

MX/CC - Lonestar 250R frame/a-arms/swingarm/axle/steering stem/hubs, Fullbore Plastics, xr600 engine with TC mods/pipe, Holeshot XC f/r tires for CC and grooved radials and Grooved Turf Tamers for MX, Hi-per wheels w/ beadlocks front and rear, Oneal Pro Locks, Noleen or Axis shocks, Graydon Nerfs/bumper/grab bar....

 

one that someone would buy for me, where money is endless!!!!!!!!! LOL

 

ahah!!
That's right!