I recently traded for a 1995 Warrior, and it started right up at the peoples house. When I got it home I took the fenders off to paint it, but I didn't mess with any wires. I put the fenders back on a week later, and I hadn't done anything to the ATV except take the carb. off and clean it, I went to start it, and it fired right up, but shut off after a minute or two. It did this a couple times, but then it wouldn't start at all. So I took the plug out, cleaned it, put it back on the cable, and held it against the motor to see if it was firing. It would fire a couple times than stop. So I put a different cylenoid on, and it didn't get any fire. What could be wrong?

I'm always working on those dang Hondas, and I never have to fool with our Yamahas.[img]i/expressions/beer.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]

 

stator?

 

it has a new startor on it. could the wiregoing to the plug be shorted out?

 

mine wasnt firing when i got it...went through everything...put new wiring harness and all and still didn get fire...bought a stator and it fired right up

 

i fixed it, there was a bare wire that was touching the frame, i tapexd it up and she ran great

 

that's good that oyu fixed it..