Warrior
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I recently traded for a 1995 Warrior, and it started right up at the peoples house. When I got it home I took the fenders off to paint it, but I didn't mess with any wires. I put the fenders back on a week later, and I hadn't done anything to the ATV except take the carb. off and clean it, I went to start it, and it fired right up, but shut off after a minute or two. It did this a couple times, but then it wouldn't start at all. So I took the plug out, cleaned it, put it back on the cable, and held it against the motor to see if it was firing. It would fire a couple times than stop. So I put a different cylenoid on, and it didn't get any fire. What could be wrong?
I'm always working on those dang Hondas, and I never have to fool with our Yamahas.[img]i/expressions/beer.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]
I'm always working on those dang Hondas, and I never have to fool with our Yamahas.[img]i/expressions/beer.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)