I goofed and thought my throttle stop screw was my idle adjuster scre and turned it all the way in then out 2 turns {Big screw with spring} and now i dont know the proper adjustment for it [img]i/expressions/face-icon-small-sad.gif[/img] help any1?

 

on the left side of the carb?? that is the idle screw.. but you don't turn it 2 turns.. you turn it until it has a proper idle speed

 

pilot air screw out 1 1/4 turn.....then adjust throttle stop .. idle speed 1450-1550 rpm

 

a/f screw should be 2 turns out..

 

not according to yamaha

 

according to where ?

 

their service manual

 

vouche manual says 1 1/4 but i screwd the throttle stop ALL the way in now where the hell is a setting to start with on it lol, looks like it was probably almost all the way out b4 i screwd it back in [yes left side carb big screw with a big spring]

I finally got my warrior running, had to tie a rope to it and my buddys truck {just like i did to my tooth lol} and bumped it in 4th cause it wont start automaticly [geussing valves r too tight or loose] and when it was running it ran like way toooo
high of an idle