new to the forum and need a little help. I have a 1997 Honda TRX300FW Fourtrax and the rear bearing needs replacing. disassembled the right side and removed what was left of the bearing. Does anyone have a detailed step by step instruction to replace the bearing? also while I have it disasemmbled should I go ahead and replace all the seals?

 

I can email you the service manual for this bike for free- It's a large PDF- about 35 megs- contains about 390 pages...

 

If it isn't to much trouble could I get a copy also? Thanks.

 

Thanks for the offer beergut, I would appreciate it. would be nice to double check everything. goddym@bellsouth.net

I replaced the rear bearing as well as both the front bearings and it seems like everything is ok.

 

To everyone who contacted me in regards to the manual- I have to figure out how to email a 35meg file. It's too large for yahoo or outlook and it keeps getting bounced back. If I cant figure it out by tomorrow, I'll put it on a disk and mail it to you-

 

ok- I figured it out- if anyone else needs it let me know- I also have the owners manual for the trx300fw as a PDF- I think it covers 1995-2000 (same as the service manual)

 

i would really like a copy of that manual if it isn't too much trouble. i just picked up a 98 300 4x4 really cheap but it needs some luv. my email is mudder123@hotmail.com. thank you in advance

 

Here guys- I'll just post the links. I've been getting a lot of email requests... one is the owners and the other is the service manual.

https://share.acrobat.com/adc/docume...7-6bf99fc2229c



https://share.acrobat.com/adc/docume...5-5f1b0c807416