I finished it, but now no spark.

Reply Subscribe

Thread Tools

Search this Thread

Oct 1, 2015 | 10:23 PM

Valder

Thread Starter

Pro Rider

Joined: Jan 2006

Posts: 272

Likes: 4

From: Penfield, NY

I finished it, but now no spark.

Next time I'll know to check for life before I fill it with Gas. Just as the cold weather is hitting I have to be out in the cold checking
connections. Darn it.

Attached Thumbnails

I finished it, but now no spark.-wp_20151001_19_04_30_pro.jpg

I finished it, but now no spark.-shiny-iii_20150830_18_33_03_pro_resize-1.jpg

Oct 2, 2015 | 05:55 AM

Scooter86

Extreme Pro Rider
Knows Old ATV Questions!

Joined: Sep 2003

Posts: 5,127

Likes: 3

Wow, clean looking 250! Freshly painted? Maybe a poor ground?

Oct 2, 2015 | 10:04 PM

Valder

Thread Starter

Pro Rider

Joined: Jan 2006

Posts: 272

Likes: 4

From: Penfield, NY

Thanks. Only paint is on the lower a arms as I could not get them powder coated. This was taken down to bare everything and put back together. I have to get in there and see what is wrong, but I am going to wait for it to warm up a little next week.

Here the pics of the redo. 1990 Suzuki LT250S Photo Gallery by dirtweed at pbase.com

Oct 15, 2015 | 11:00 PM

Burnpile230s

Trailblazer

Joined: Nov 2014

Posts: 64

Likes: 0

Like Valder said check your grounds and kill switch. Also check your coil in leads, they are positive and negative and can be nearly impossible to trace unless you are looking.