Honda Discussions about Honda ATVs.

What mods to make a 400EX run with a stock Banshee?

Thread Tools
 
Search this Thread
 
Old Oct 12, 2001 | 09:37 AM
  #1  
RAPTORAZ's Avatar
Thread Starter
|
Pro Rider
Joined: Dec 2000
Posts: 1,407
Likes: 0
Default

I'd like to know what mods must be done to make a 400EX run with a stock Banshee. I currently have a White Bros. air filter, a S-Bend E-series pipe(18 discs), and a 165 main with no airbox lid. How close am I?
 
Reply
Old Oct 12, 2001 | 11:01 AM
  #2  
DIEhardRlDER's Avatar
Pro Rider
Joined: Nov 2000
Posts: 386
Likes: 0
Default

take him to a mx track
 
Reply
Old Oct 12, 2001 | 02:56 PM
  #3  
Fourtracker14's Avatar
Trailblazer
Joined: Sep 2001
Posts: 93
Likes: 0
Default

It is possible. Go to exriders.com and click on videos. Then download the 400ex drag race clip. It is a video clip of a 400ex whoopin' a Banshee on a drag strip.

I have several mods to my 400ex (listed down below) and I have beat stock Banshees on the drag strip as well not every time but I have consistantly. It all depends on the start though. Banshees like to spin a lot because they are "high strung" if you know what I mean. The 400ex has produces more torgue at the low end which enables it to up and go out of the gate. However, once you get up through the gears, a Banshee will be near a 400ex. Like a bike length or two behind the EX. In know way by any means a 400ex will kill a Banshee. Now, as for tricked out Banshees, lets not go there. Those things are so fast, it's insane.

Any to anwser your question about how close you are with your mods, you should be okay. I have pretty much the same stuff done to mine and I seriously have beaten Banshees. I raced them in the sand dunes. I have a set of sand devil paddle tires which help a lot. But the Banshees that I raced also had paddle tires on as well. Forget about the mods that you have done to your quad for a second. There are really two factors that you have to think of. One is, getting a good start, and the other is how good the rider is. Both of those are very important. I hope that I answered your question okay. If you have any other questions, feel free to e-mail me. Thanks.

Fourtracker14@aol.com
 
Reply
Old Oct 12, 2001 | 06:42 PM
  #4  
PhilMoore's Avatar
Pro Rider
Joined: Jul 1999
Posts: 291
Likes: 0
Default

Your question is rather vague. Are you losing to a Banshee at something right now? A 400EX will stay with, and quite often, pass a Banshee in everything except drag race. Hate to say it, but, it mostly depends on the rider.
 
Reply
Old Oct 12, 2001 | 07:20 PM
  #5  
imported_juggalo's Avatar
Pro Rider
Joined: May 2001
Posts: 1,724
Likes: 0
Default

one cheap way to gain quite a bit of speed is to cut your fenders. my friend cut the fenders on his 400ex and he was a good 6 quad lengths ahead of me when we were flyin down the road.
 
Reply
Old Oct 13, 2001 | 07:34 AM
  #6  
biggy's Avatar
Pro Rider
Joined: Jul 2001
Posts: 401
Likes: 0
Default

good call jug ......cut the fenders and add a 16 tooth front sproket ...youll be able to putt a spanken on him !!!!!
 
Reply
Old Oct 13, 2001 | 09:46 PM
  #7  
2strokesrule's Avatar
Range Rover
Joined: Jun 2001
Posts: 193
Likes: 0
Default

Fourtracker400 is wrong, I have raced everything, including ported 430cc huge cam big pipe 400EX and the most built 400EX in the world can bairly take my LT250R. Banshee's are fast when built correctly, Quadzilla's smoke me and well built Banshee's stick with them. If you want to go real fast buy one of these three quad's, Quadzilla, Banshee, or DS650, those are the only three that can beat me (with less than 2 grand worth of motor mods).

I am completely unbiased here you asked about Banshee and 400EX, I don't have either.

I think the 400EX is a great woods quad but it is just not the fastest out there (by far)

You can look at all the video's you want of 400EX's racing anything but you do not know what kind of an idiot built the quad, or what kind of a tard is riding it.
 
Reply
Old Oct 13, 2001 | 09:57 PM
  #8  
2strokesrule's Avatar
Range Rover
Joined: Jun 2001
Posts: 193
Likes: 0
Default

Juggalo, I used to have respect for you but "cut your fenders" is the dumbest thing you can do unless you race on an MX track. Wind resistance doesn't make any diference until you are going at least 80 - 90 and there is no way a 400 is going to do that. DO NOT CUT YOUR FENDERS, they guy who owned my quad before me did and it sucks!!! every puddle is in your face, every corner in the sand, the sand is in your face.

Wait a minute let me take my headlight off and gain 6 quad legths in a race (DUUUHHH)

Maybe I can put smaller tires in the front and gain 20 quad length's, or god forbid duck down a little and gain 70MPH on my top end.

I DON'T THINK SO!!!!!!!!!
 
Reply
Old Oct 14, 2001 | 12:18 AM
  #9  
SandTraxx's Avatar
Weekend Warrior
Joined: Jan 2000
Posts: 18
Likes: 0
Default

2strokesrule, are you serious???? LT250R, give me a break! Your lucky to be winning any races!
 
Reply
Old Oct 14, 2001 | 12:40 AM
  #10  
bsr's Avatar
bsr
Trailblazer
Joined: Sep 2001
Posts: 26
Likes: 0
Default

2strokerules, I agree people who think cutting there fenders will make them go faster is really stupid. Not only will you get mud, sand, and dirt in your face in some cases it will make your 400ex look stupid. Why don't we just remove the plastic all together and put vents in the front and we'll get 10 places better in a race... I DONT THINK SOO.. If anything is going to help it would be making your quad lighter not more air resistant !!! Taking 10 lbs off your bike will make it much faster then any cut fender is going to do....
 
Reply



All times are GMT -5. The time now is 07:47 PM.