i have a severe problem with my grizz. first off i went camping and left the hand warmers on over night ( i Spam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word er-rigged them straight to the battery, not to the key switch) anyways my battery was very dead in the morning. no problem, since i don't have a polaris [img]i/expressions/face-icon-small-happy.gif[/img] i just pull started it and away i went. i rode home for 15 minutes and parked it for about 6 hours, than took it on another 7 min. ride. my battery was still dead so i pull started it again. i brought it home the same way and parked it over night. all was fine till this morning i started it up (pulled it again) and the speedometer says i'm going 13mph, IN NEUTRAL! i gave it some gas in nuetral and guess what i was going 40 mph standing still! i can't put it in reverse because of the rev limiter. i tried charging it for 5 hours and nothing. WTF IS WRONG? is the computer way off and f^cked up. i hope there is an easy way to fix this problem, anyone have any suggestions?

Oh yeah and the shifter has a loose wire or something. sometimes i have to jiggle the shifter back and orth for the green neutral light to come on. I need some help here to.

 

come on nobody has any help for me?

 

Have you had the battery tested yet to see how far it drains down under a load. It my have a dead cell!

 

As far as everything else check your grounds and your connections at the sensors for good contact!

Hope this helps![img]i/expressions/face-icon-small-smile.gif[/img]

 

Sorry Dude...but I'm ROTFLMAO at your post...have your battery load tested...with all the electronics on the new bikes sometimes they get pretty goofy just because the battery is shot. Have the battery tested at your favorite autozone, pepboys, napa, whatever...dollar to a doughnut it is a battery related problem...quit Spam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word er riggin chit![img]i/expressions/face-icon-small-shocked.gif[/img] It's called "southern engineering" where I'm from!