going riding in a mouth or so and my wheel feels loose it drives fine but i dont know y its so lose my lug nuts are tight is it the wheel bearing or a cv or something like that is it anything to be worried about?

thanks Derek

 

500man- Try to tighten the nut in the center of the wheel. If the center nut and your lug nuts are tight, it is most likley a bad wheel bearing.

 

Don't drive it until its fixed too.

 

the center bolt is tight.
so it cant be the cv then? that all the other guys r always breaking
how munch are bearings

thanks

 

The only way a broken axle can make your wheel loose is if it broke inside the steering knuckle. If this is the case your wheel would be held on only by the brake caliper until it falls off completely.

A loose tie rod end bolt will also make your tire feel loose. Jack it up and see where the slack is. Bearings are around $35 each.

 

Yah jack it up and shift the tire around, not turn it but move it horizontally, if you know what I mean. If it wobbles its most likely the bearing.

 

whats up with ur pics

 

Opps my bad, i fixed it hehe, was messing with subdomains...