Anyone know if the suzuki king quad and the AC 300 have the same hubs? I am looking for sealed bearings and we can get some made by "all *****" but the closest thing I can get is for the king quad.

Thanks!

Matt

 

If it was me, and it will be soon, I would pull the bearings, take them to a bearing wholesaler( look in the phone book) and tell them what you want. I will bet they come up with what you need. I use to race outboards and the manufactures would tell me they were special, built for them only. This was a lie in almost all cases. I had a friend working at Bearings Inc. in Seattle and he told me, unless there were special prefixes or suffixes on the bearings numbers that they were just standard bearings. He then proceeded to get me all my gearcase bearings for about 30 bucks compared to just under a hundred from a dealer. I later went into the marine industy and learn that the manufacture lie a lot. I once had a real slow week so I looked up all the parts to make a 10 hp outboard. Parts cost alone was almost 4 times what the assembled motor cost. Otherwise they make a fortune off parts sales.

 

They are not the same, I ahd a king quad and my buddy has a cat, we did both of ours and they are way differnt, there are alot of companies you can get these parts through though. Good Luck