How much horsepower and torque?
#12
How much horsepower and torque?
if you are that desperate for more pony's you can do one of a couple things get a 650 or else i am sure they make a big bore kit for the 500 with new piston and jugs and everything maybe highlifter even has it cause it sounds like you want a 4x4 utility atv that has the power like a lightweight sport bike
#13
#14
How much horsepower and torque?
Rem, I hope you arent breaking it in easy like the manual says for starters. look at this page. www.mototuneusa.com/break_in_secrets.htm Read the whole thing!
Put a Dynotjet Kit in the carb. That'll give you about 2.4 hp (about 50-60 bucks)
Put a K&N filter in. May give you 1/2 hp. (in the 35-45 dollar range)
Drill your stock muffler (do a search in the AC forum to get the info). Not sure about the HP gain but they say it'll wake up the midrange in the bike. (free)
That'll be about it without getting too far in your pocket.
The 500 should go 55 with no problems on stock tires. Some have reported higher speeds.
Put a Dynotjet Kit in the carb. That'll give you about 2.4 hp (about 50-60 bucks)
Put a K&N filter in. May give you 1/2 hp. (in the 35-45 dollar range)
Drill your stock muffler (do a search in the AC forum to get the info). Not sure about the HP gain but they say it'll wake up the midrange in the bike. (free)
That'll be about it without getting too far in your pocket.
The 500 should go 55 with no problems on stock tires. Some have reported higher speeds.
Thread
Thread Starter
Forum
Replies
Last Post
1ArmBandit
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
55
10-14-2015 09:03 PM
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)