v2 650 Blet slipping under load
#1
#3
v2 650 Blet slipping under load
For some reason, his belt may be getting wet. I for one have no problems in water or mud. But if its a early year V2, it may be leaking somewhere. Highlifter has some good clutch kits. Otherwise, have him take the belt cover off, check the deflection and wear on the belt, and put a new gasket seal around the belt cover. He can also tighten all of his hose clamps coming off the front airbox and main airbox to get a good seal
#6
#7
v2 650 Blet slipping under load
Originally posted by: buckaroo50
If the belt is slipping then obviously there is a problem with the belt, putting in a clutch kit is not going to cure the problem until you address the real issue.
If the belt is slipping then obviously there is a problem with the belt, putting in a clutch kit is not going to cure the problem until you address the real issue.
Trending Topics
#8