what jets shpiuld i get for my dvx 400 i just got a hmf pipe slip on for it ?

 

Just the slip on? No other mods to the intake....KN filter, lid off?

 

<div class="FTQUOTE"><begin quote>Originally posted by: hondabuster

Just the slip on? No other mods to the intake....KN filter, lid off?</end quote></div>

nope just the pipe i will be getting a k&n soon hopefully i dont like the air box lid off

 

If you havent changed the intake side, it wont be too far from stock jetting. Id go up one on the pilot jet, and up one or two on the main.
Heres agood article on jetting, and it describes the symptoms of lean and rich, and you can make the changes based on that,
http://www.motorcyclecruiser.c...carburetion/index.html

 

yes that helped

but would it hurt to not jet it it runs just fine maybe a bit rich

 

Not sure on your elevation, but I run a 155 Mikuni main(probably should run a 157) w/ a 25 pilot. 800 above sea level. Also, HMF has a jetting specs. on their website.

 

ok i think that is about the elevation i run so thanks