Ball Joint
#1
#2
It's very easy to do. And the ball joint cost about 32 bucks.
Jack up your bike, remove the tire and shock, unbolt the ball joint from the knuckle/spindle, remove the Cir-clip from the bottom side of the a-arm that holds the ball-joint on, use a SMALL wheel puller to press the balljoint threw the a-arm hole.
Then to install it just bolt it to the knuckle/spindle, put some Green lock tight around the ball joint, slip it in the a-arm, put the cir-clip on, put the shock on, then put your tire back on.
Simple as that.
Jack up your bike, remove the tire and shock, unbolt the ball joint from the knuckle/spindle, remove the Cir-clip from the bottom side of the a-arm that holds the ball-joint on, use a SMALL wheel puller to press the balljoint threw the a-arm hole.
Then to install it just bolt it to the knuckle/spindle, put some Green lock tight around the ball joint, slip it in the a-arm, put the cir-clip on, put the shock on, then put your tire back on.
Simple as that.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)