'86 ATC 250R - Changing Rear Disc Pads, Help!
Jul 2, 2003 | 05:15 PM
#11
Range Rover
Joined: May 2003
Posts: 137
Likes: 0
'86 ATC 250R - Changing Rear Disc Pads, Help!
I had a similar problem with the bleeding - I found that not letting the pedal come all of the way up while bleeding solved it.
Hold down pedal - loosen bleeder valve (into a tube going into a cup of fluid) - let fluid escape - tighten bleeder valve - pump 3-5 times letting the pedal only come half way up - repeat.
These old brakes are a pain, I'll give you that. They work great until you touch them.
Hold down pedal - loosen bleeder valve (into a tube going into a cup of fluid) - let fluid escape - tighten bleeder valve - pump 3-5 times letting the pedal only come half way up - repeat.
These old brakes are a pain, I'll give you that. They work great until you touch them.
Thread
Thread Starter
Forum
Replies
Last Post
SixSpeed5
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
8
Aug 2, 2015 05:38 PM
CRamshaw777
Classifieds, Garage Sale & Swap Shop
0
Jul 18, 2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)