need advice about a 1984 200m
May 3, 2004 | 10:51 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Apr 2004
Posts: 15
Likes: 0
need advice about a 1984 200m
OK i just got a 1984 honda atc 200m. its just the frame and the forks and the front tire. i was wondering if it is worth rebuilding it. An also is there a way to put rear suspention on it, i know how to weld.
May 4, 2004 | 01:22 AM
#2
Pro Rider
Joined: Feb 2004
Posts: 551
Likes: 0
need advice about a 1984 200m
Sounds like you'll need a second parts bike in order to build one complete bike.
As for the rear suspension. Forget about it. It could be done but it's not worth it. (unless you are just a monster garage freak who wants to try) Look for a 200x frame and go from there if you want rear suspension.
As for the rear suspension. Forget about it. It could be done but it's not worth it. (unless you are just a monster garage freak who wants to try) Look for a 200x frame and go from there if you want rear suspension.
May 7, 2004 | 10:44 PM
#4
The Facility
Joined: Nov 2001
Posts: 4,062
Likes: 1
From: Mississippi
need advice about a 1984 200m
Me third that.[img]i/expressions/face-icon-small-wink.gif[/img]
If you don't have the rearend either, I would forget about it as a project and find something else.
Like these guys said, if you want rear suspension, it's better to start with a 200X chassis, and there are plenty different engine combinations that will bolt right into this frame.
If you don't have the rearend either, I would forget about it as a project and find something else.
Like these guys said, if you want rear suspension, it's better to start with a 200X chassis, and there are plenty different engine combinations that will bolt right into this frame.
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
Apr 23, 2016 07:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
