350x Restoration Complete.....Sorta..
#1
350x Restoration Complete.....Sorta..
I finally got the 350x back up from it bein totally stripped down to its bare frame and rebuilt from the ground up. Here's a list of parts i had to buy:
Service Manual: $43.80
350x Fender Decals: $22.00
Seat: $62.00
Seat Hardware: $88.09
Rear Fenders: $128.59
Handle Bar Levers: $6.00
Air Filter Assembly W/ K&N Filter: $30.63
Two Spark Plugs: $4.50
Hub Bolt: $5.22
Hub Nut: $3.53
Rear Sprocket Bolt: $3.84
Rear Sprocket Nut: $3.15
Steering Stem Bearing: $.58
Clutch Lever Boot: $5.36
Gasket, EX. Pipe: $4.72
Gasket, Muffler: $8.40
Exhaust Clamp Bolts: $2.10
Washer, Tank Setting: $3.15
Master Cylinder Cup Screws: $.74
Exhaust Studs: $11.48
Mounting Bolt Collars: $22.66
Exhaust Clamp: $18.29
Air Filter Hose Clamp: $7.88
Air Filter Hose Clamp Screw: $.37
Clutch Cable: $21.42
Clip, Breather Tube: $2.49
Tube Drain: $2.56
With shipping included it came out to around $530 for all of that and i still have some things to buy for it [img]i/expressions/face-icon-small-sad.gif[/img]. Oh yeah i have put new pics of it on my pictures page. Oh yeah if you have any questions regarding my restoration feel free to send me a PM. Enjoy the pics!
Service Manual: $43.80
350x Fender Decals: $22.00
Seat: $62.00
Seat Hardware: $88.09
Rear Fenders: $128.59
Handle Bar Levers: $6.00
Air Filter Assembly W/ K&N Filter: $30.63
Two Spark Plugs: $4.50
Hub Bolt: $5.22
Hub Nut: $3.53
Rear Sprocket Bolt: $3.84
Rear Sprocket Nut: $3.15
Steering Stem Bearing: $.58
Clutch Lever Boot: $5.36
Gasket, EX. Pipe: $4.72
Gasket, Muffler: $8.40
Exhaust Clamp Bolts: $2.10
Washer, Tank Setting: $3.15
Master Cylinder Cup Screws: $.74
Exhaust Studs: $11.48
Mounting Bolt Collars: $22.66
Exhaust Clamp: $18.29
Air Filter Hose Clamp: $7.88
Air Filter Hose Clamp Screw: $.37
Clutch Cable: $21.42
Clip, Breather Tube: $2.49
Tube Drain: $2.56
With shipping included it came out to around $530 for all of that and i still have some things to buy for it [img]i/expressions/face-icon-small-sad.gif[/img]. Oh yeah i have put new pics of it on my pictures page. Oh yeah if you have any questions regarding my restoration feel free to send me a PM. Enjoy the pics!
#4
#5
#7
Trending Topics
#8
350x Restoration Complete.....Sorta..
-thebutler I havent worked on it in a while because I was going to move my ATV shop and so i packed up all its peices and carried it home, well now i am not moving my shop so i have to bring it back up here. I am waiting on the guy who is going to powder coat the frame for me to get his other element in his oven. After that, let the chroming begin ( yeah i am building a show trike kinda ).
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)