350X bore and stroke
#2
I just got my 350x back together. Had to put a new piston and ring in it. i had to go .020 overbore, luckily it had a standard bore.
Anyways, I have the Honda service manual in front of me.
Type: Gasoline, air-cooled 4 stroke
Cylinder arrangement: Singel cylinder inclined 20 degreees
Bore x Stoke: 81 x 68mm (3.2 x 2.7 in)
Displacement: 350.4 cc (21.38 cu in)
Compression Ratio: 8.5:1
Max Horsepower: 27PS/7000 rpm
Max Torque: 30 kg-m/6000 (21.70 ft-lb)
Thats a few of the specs. If you need anything else let me know and I'll look it up.
Anyways, I have the Honda service manual in front of me.
Type: Gasoline, air-cooled 4 stroke
Cylinder arrangement: Singel cylinder inclined 20 degreees
Bore x Stoke: 81 x 68mm (3.2 x 2.7 in)
Displacement: 350.4 cc (21.38 cu in)
Compression Ratio: 8.5:1
Max Horsepower: 27PS/7000 rpm
Max Torque: 30 kg-m/6000 (21.70 ft-lb)
Thats a few of the specs. If you need anything else let me know and I'll look it up.
Thread
Thread Starter
Forum
Replies
Last Post
exmotocrosser
Polaris
10
09-13-2019 06:12 AM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)