ok my atc was running good until it stop sparking i wiggled the spark plug wire around and all the wires and it sparked 2 times then stoped its not the spark advance or sparkplug wire i tryed wiggling the wires but still no spark what could it be the coil or cdi box? please help

 

My old 110 use to do that every couple weeks and it was always the connection between the spark plug boot and wire. The boot on my wire screwed on and off and it would get loose and gunked up. Make sure you check for shorts in your on/off switch and wires also.

 

ok i checked all wires cleaned them up everything and still no spark?

 

Did you change your plug? then check your plug wire, it may be burned out at one end or the other.
If that doesn't work start at your CDI and check resistance forwards through all the connections, including the kill swich and to the coil,

You can get the resistance ranges at deepa.reconranger.com Honda manuals
go through it step by step you'll figure it out preety quick.
Darrel

 

ok i put a new plug in and the one pug wire that was oringinally in it was broke so i put another one in it that i knew worked and still nothin so i will check the cdi box for resistance
thanks for the reply
melvin

 

i tryed everthing and nothing worked until i was checking the wires that lead under the flywheel and the part where to wires attach well one of the wires came loose i poped it back in and she spark like new
thanks for all the replys anyway!

 

hey melvin did you ever get your hubs off you axle???

 

i havent tryed because my grinder doesent work so its no big deal unless they need to come off

 

try the primary coil on the stator assembly , thats probably what it is. you can get a new one on ebay for about 20-30 bux

 

thanks i had to put the wire back on on the stator and it sparked good